REQUIREMENTS:
- CALTERM 5
- CUMMINS INSITE
- PACCAR ESA
- TEAMVIEWER FULL CLIENT 64-BIT OR TEAMVIEWER FULL CLIENT 32-BIT
- NEXIQ USB LINK 3 or 2
- KONNECT KABLE ACM BENCH HARNESS or PACCAR BYPASS CABLE
- ADJUSTABLE POWER SUPPLY (WE RECOMMEND THE SIGLENT SPD1305X) IF FLASHING ON THE BENCH
INSTRUCTIONS FOR BENCH:
- CONNECT BENCH HARNESS TO THE NEXIQ AND THE NEXIQ TO THE LAPTOP
- CONNECT TO ADJUSTABLE POWER SUPPLY OR BATTERIES. SET VOLTAGE TO 12.5V AND AMPS TO 5A
- OPEN CUMMINS INSITE AND CONNECT TO THE ACM - IF IT DOES NOT CONNECT DOUBLE CHECK YOUR WORK, MAKE SURE THE CORRECT DEVICE IS SELECTED.
- OPEN CALTERM - DO NOT CONNECT
- COPY AND PASTE TEAMVIEWER USER ID AND PASSWORD AND SEND IT TO US WITH WHATSAPP. (+52 821-159-9183)
- UPON COMPLETION OF THE WORK WE WILL PROVIDE YOU WITH INSTRUCTIONS.
- REINSTALL THE ACM
INSTRUCTIONS IN CAB:
- CONNECT BYPASS TO THE NEXIQ AND THE NEXIQ TO THE LAPTOP
- OPEN CUMMINS INSITE AND CONNECT TO THE ACM - IF IT DOES NOT CONNECT DOUBLE CHECK YOUR WORK, MAKE SURE THE CORRECT DEVICE IS SELECTED.
- OPEN CALTERM - DO NOT CONNECT
- COPY AND PASTE TEAMVIEWER USER ID AND PASSWORD AND SEND IT TO US WITH WHATSAPP. (+52 821-159-9183)
- UPON COMPLETION OF THE WORK WE WILL PROVIDE YOU WITH INSTRUCTIONS.
TO PURCHASE OEM DIAG SOFTWARE YOU NEED TO DOWNLOAD WHATSAPP
MESSAGE A GENTLEMAN NAMED GABRIEL AKA PERU
TELL HIM CALCO TUNING REFERRED YOU
+51 954 450 053